User's Manual

4. Create a vericaon code or change the old vericaon code.
Note
The vericaon c
ode is required when you add the camera to Hik-Connect service.
5. Click and read "T
erms of Service" and "Privacy Policy".
6. Conrm the sengs.
13.7.2 Set Up Hik-Connect
Steps
1. Get and ins
tall Hik-Connect applicaon by the following ways.
-
Visit
hps://appstore.hikvision.com to download the applicaon according to your mobile
phone sy
stem.
-
Visit the ocial site of our company. Then go to Support → Tools → Hikvision App Store .
-
Scan the QR code below to download the applicaon.
Note
If errors like "Unknown app" occur during the installaon, solve the problem in two ways.
• Visit hps://appstore.hikvision.com/stac/help/index.html to refer to the troubleshoong.
• Visit hps://appstore.hikvision.com/ , and click Installaon Help at the upper right corner of
the in
terface to refer to the troubleshoong.
2. Start the
applicaon and register for a Hik-Connect user account.
3. Log in aer registraon.
13.7.3 Add Camera to Hik-Connect
Steps
1. Connect your mobile device to a Wi-Fi.
2. Log into the Hik-Connect app.
3. In the home page, tap "+" on the upper-right corner to add a camera.
4. Scan the QR code on camera body or on the Quick Start Guide cover.
Note
If the QR code is missing or too blur to be recognized, you can also add the camera by inpung
the camera's serial number.
5. Input the vericaon code of your camera.
Ne
twork Speed Dome User Manual
96