User's Manual

By Browsers Enter the domain name in the browser address bar to access the
device.
B
y Client Soware Add domain name to the client soware. Refer to the client manual for
specic adding methods.
13.6 Access to Device via PPPoE Dial Up Connecon
This de
vice supports the PPPoE auto dial-up funcon. The device gets a public IP address by ADSL
dial-up aer the device is connected to a modem. You need to congure the PPPoE parameters of
the device.
Steps
1. Go to Conguraon → Network → Basic Sengs → PPPoE .
2. Check Enable PPPoE.
3. Set the PPPoE parameters.
Dynamic IP
Aer successful dial-up, the dynamic IP address of the WAN is displayed.
User Name
User name for dial-up network access.
Password
Password for dial-up network access.
Conrm
Input your dial-up password again.
4. Click Sav
e.
5. Access the device.
By Browsers Enter the WAN dynamic IP address in the browser address bar to
access the device.
B
y Client Soware Add the WAN dynamic IP address to the client soware. Refer to the
client manual f
or details.
Note
The obtained IP address is dynamically assigned via PPPoE, so the IP address always changes
aer reboong the c
amera. To solve the inconvenience of the dynamic IP, you need to get a
domain name from the DDNS provider (e.g. DynDns.com). Refer to Access to Device via Domain
Name for detail informaon.
Network Speed Dome User Manual
94