User Manual

User Manual of Network Speed Dome
© Hikvision
88
3. Edit the name in to set a
name for the alarm input (optional).
Figure 6-51 Alarm Input Settings
4. Click to set the arming schedule for the alarm input. Refer to Step 2
in Section 6.6.1 Configuring Motion Detection.
5. Check the checkbox to select the linkage method taken for the alarm input. Refer
to Step 3 in Section 6.6.1 Configuring Motion Detection.
6. You can also choose the PTZ linking for the alarm input. Check the relative
checkbox and select the No. to enable Preset Calling, Patrol Calling or Pattern
Calling.
7. You can copy your settings to other alarm inputs.
8. Click to save the settings.