User Manual

User Manual of Network Speed Dome

The Server Address should be entered with the static IP address of the

computer that runs the IP Server software. For the IP Server, you have to

apply a static IP, subnet mask, gateway and preferred DNS from the ISP.

Figure 6-13 IPServer Settings

 HiDDNS:

Steps:

(1) Enter the Server Address: www.hik-online.com.

(2) Enter the Domain name of the camera. The domain is the same with the

device alias in the HiDDNS server.

(3) Click to save the settings.

Figure 6-14 HiDDNS Settings

 NO-IP:

Steps:

(1) Enter Server Address of NO-IP.

(2) In the Domain text field, enter the domain name obtained from the NO-IP

website.

(3) Enter the Port of NO-IP server.

(4) Enter the User Name and Password registered on the NO-IP website.

(5) Click to save the settings.

6.3.5 Configuring SNMP Settings

Purpose:

You can use SNMP to get speed dome status and parameters related information.

Before you start:

Before setting the SNMP, please use the SNMP software and manage to receive the

speed dome information via SNMP port. By setting the Trap Address, the speed dome