User Manual

User Manual of Network Speed Dome
© Hikvision
117
Steps:
1. Enter the Maintenance interface:
Configuration > Basic Configuration> System > Maintenance
Or Configuration > Advanced Configuration> System > Maintenance:
2. Click to remotely reboot the network speed dome.
10.7.2 Restoring Default Settings
Steps:
1. Enter the Maintenance interface:
Configuration > Basic Configuration> System > Maintenance
Or Configuration > Advanced Configuration> System > Maintenance
2. Click or to restore the default settings.
Clicking button will restore all the parameters to default settings
including the IP address and user information. Please use this button with
caution.
Figure 10-8 Restore Default Settings
10.7.3 Importing/Exporting Configuration File
Steps:
1. Enter the Maintenance interface:
Configuration > Basic Configuration> System > Maintenance
Or Configuration > Advanced Configuration> System > Maintenance
2. Click to select the local configuration file and then click to
start importing configuration file.
You need to reboot the speed dome after importing configuration file.