Quick Start Guide

Network Speed Dome·Quick Start Guide
23
For wooden wall, you can just use the self-tapping screw to fix the bracket.
Make sure that the wall is strong enough to withstand more than eight times the
weight of the speed dome and the accessories.
The bracket in Figure 2-7 is the recommended bracket for this series of speed dome,
and a pendent adapter is required if any other bracket is selected. The dimension of
pendant adapter is G1
1
2
.
Steps:
1. Remove the protective sticker as shown in Figure 2-39.
Protective Sticker
Figure 2-39 Remove Protective Sticker
2. Remove the cover on the back of speed dome as shown in Figure 2-40. Insert the
memory card to the memory card slot and install the cover back.
Memory Card Slot
Figure 2-40 Memory Card Slot
3. Secure the bracket with four hex nuts and washers.