User Manual

Allowed Only IP addresses in the list can access the device.
4. Edit the IP address
lter list.
Add Add a new IP address to the list.
Modify Modify the selected IP address in the list.
Delete Delete the selected IP address in the list.
5. Click Save.
11.12.3 Set HTTPS
HTTPS is a network protocol that enables encrypted transmission and identy authencaon,
which improves the security of remote access.
Steps
1. Go to Conguraon → Network → Advanced Sengs → HTTPS .
2. Check Enable .
3. Click Delete to recreate and install
cercate.
Create and install self-signed cercate Refer to Create and Install Self-signed Cercate
Create cercate request and install
cercate
Refer to Install Authorized Cercate
4. Click Save.
Create and Install Self-signed
Cercate
Steps
1. Check Create Self-signed Cercate.
2. Click Create.
3. Follow the prompt to enter Country, Hostname/IP, Validity and other parameters.
4. Click OK.
Result
The device will install the self-signed
cercate by default.
Install Authorized
Cercate
If the demand for external access security is high, you can create and install authorized cercate
via HTTPS protocol to ensure the data transmission security.
Steps
1. Select Create cercate request rst and connue the installaon.
2. Click Create.
E Series Network Speed Dome User Manual
83