User Manual

9.2.4 Nofy Surveillance Center
Check Nofy Surveillance Center, the alarm informaon is uploaded to the surveillance center
when an alarm event is detected.
9.2.5 Smart Tracking
Check Smart Tracking, and the device tracks the target when an alarm event is detected.
9.2.6 Trigger Recording
Check Trigger Recording, and the device records the video about the detected alarm event.
For recording sengs, refer to Video Recording and Picture Capture
9.2.7 Flashing Light
Aer enabling Flashing Light and seng the Flashing Light Alarm Output, the light ashes when
an alarm event is detected.
Set Flashing Alarm Light Output
When events occur, the ashing light on the device can be triggered as an alarm.
Steps
1. Go to Conguraon → Event → Basic Event → Flashing Alarm Light Output .
2. Set Flashing
Duraon, Flashing Frequency and Brightness.
Flashing Duraon
The me that the ashing lasts when one alarm happens.
Flashing Frequency
The rate at which the light ashes. High frequency, medium frequency, low frequency, and
normally on are selectable.
Brightness
The brightness of the light.
3. Set the arming schedule. See Set Arming Schedule for details.
4. Click Save.
Note
Only certain device models support the funcon.
E Series Network Speed Dome User Manual
65