User Manual

Click to operate lens inializaon.
5.1.13 Track Manually
In live view, manually select a target for the device to track.
Steps
1. Click
on the toolbar of the live view page.
2. Click a moving object in the live image.
The camera tracks the target and keep it in the center of live view image.
5.1.14 Conduct 3D
Posioning
3D posioning is to relocate the selected area to the image center.
Steps
1. Click
to enable the funcon.
2. Select a target area in live image.
-
Le click on a point on live image: the point is relocated to the center of the live image. With
no zooming in or out eect.
-
Hold and drag the mouse to a lower right posion to frame an area on the live: the framed
area is zoomed in and relocated to the center of the live image.
-
Hold and drag the mouse to an upper le posion to frame an area on the live: the framed
area is zoomed out and relocated to the center of the live image.
3. Click the
buon again to turn o the funcon.
5.1.15 OSD Menu
When network access is unavailable, you can call the Preset No.95 to show OSD menu to start
device
conguraon.
Click direcon buons or and to move up and down.
Click
to conrm your selecon.
5.1.16 Display Target
Informaon on Live View
Go to Conguraon → Local → Live View Parameters for sengs.
Note
Related smart funcon should be congured and enabled in advance.
Display POS Informaon
E Series Network Speed Dome User Manual
25