Quick Start Guide

E Series Network Speed Dome·Quick Start Guide
24
3 Setting the Speed Dome over the LAN
Notes:
 You shall acknowledge that the use of the product with Internet access might be
under network security risks. For avoidance of any network attacks and information
leakage, strengthen your own protection. If the product does not work properly,
contact with your dealer or the nearest service center.
 To ensure the network security of the speed dome, we recommend you to have the
speed dome assessed and maintained termly. You can contact us if you need such
service.
3.1 Wiring
To view and configure the speed dome via LAN (Local Area Network), you need to
connect the network speed dome in the same subnet with your PC. Then, install the
SADP or client software to search and change the IP address of network speed dome.
Connect the speed dome to network according to the following figures.
Network Cable
Network Speed Dome
Computer
Figure 3-1 Connecting Directly
网络交换机
Network Cable
Network Cable
or
Network Speed Dome
Computer
Figure 3-2 Wiring over LAN
3.2 Activating the Speed Dome
Purpose:
You are required to activate the speed dome first by setting a strong password for it
before you can use the speed dome.