Quick Start Guide

E Series Network Speed Dome·Quick Start Guide
21
Lock
Lock
Figure 2-29 Locks
2) Push the back box into the mounting hole in the ceiling.
3) Tighten the lock screws with the screwdriver and the locks will automatically
rotate outwards to secure the in-ceiling bracket to the ceiling.
Ceiling
Lock
Lock
Figure 2-30 Install the Speed Dome to the Ceiling
4. Install the trim ring.
5. Remove the protective film on the bubble after the installation is finished.
2.4 Installing DE5xxxI Series (IR) Speed Dome
Notes:
 Refer to Section 2.1.1 Wall Mounting for wall mounting steps for DE5xxxI series (IR)
speed dome.
 Refer to Figure 2-31 for memory card slot of DE5xxxI (IR) series speed dome.