Quick Start Guide

E Series Network Speed Dome·Quick Start Guide
18
1) Place the in-ceiling bracket on the speed dome according to the direction of the
arrow shown in Figure 2-23.
2) Rotate and tighten three SC-AM6 × 14 screws on the bracket to fix the bracket
with the speed dome.
Screws
Figure 2-23 Install the Bracket
5. Install the speed dome to the ceiling.
1) Align the toggle bolts with the screw holes on the ceiling.
2) Push the speed dome according to the direction of the arrow in Figure 2-24 to
the mounting hole.
Figure 2-24 Push to the Mounting Hole
3) Rotate two M4 × 70 screws clockwise and the toggle will automatically rotate
down to secure the speed dome to the ceiling. Fix the locks on the ceiling.