Quick Start Guide

E Series Network Speed Dome·Quick Start Guide
14
Rear Cover Memory Card Slot
Figure 2-16 Memory Card Slot (Type I)
Screws
Memory Card Slot
Figure 2-17 Memory Card Slot (Type II)
3) Install the rear cover back and tighten the lock screws.
2. Install the bracket.
Note:
Refer to step 2 in Section 2.1.1 Wall Mounting.
3. Install the speed dome to the bracket.
1) Hook the two ends of the safety rope to the speed dome and the bracket
respectively as shown in Figure 2-18.