Quick Start Guide

E Series Network Speed Dome·Quick Start Guide
7
 The bracket in Figure 2-4 is the recommended bracket for this series of speed dome,
and a pendent adapter is required if any other bracket is selected. The dimension of
pendant adapter is G1
1
2
.
Steps:
1. Install the memory card.
1) Loosen the lock screws on the speed dome bubble and remove the bubble.
2) Remove the protective lens cover, foam, and sticker.
Lens Cover
Protective Sticker
Protective Foam
Bubble
Figure 2-2 Remove the Protective Accessories
3) Align the memory card with the memory card slot and insert it.
Memory Card Slot
Figure 2-3 Memory Card Slot
4) Install the bubble back and tighten the lock screws.
2. Install the bracket.
1) Get the bracket and screws from the packing box as shown in Figure 2-4.
Figure 2-4 Wall Mounting Bracket