User's Manual

User Manual of Network PTZ Camera
© Hikvision
76
3. There will be the certificate information after you successfully create and install the
certificate.
Figure 6-15 Installed Certificate Property
 The default port number of HTTPS is 443. The port value ranges from 1 to 65535.
 When the port number is the default number 443, the format of the URL is https://IP address,
eg., https://192.168.1.64.
 When the port number is not the default number 443, the format of the URL is https://IP
address:port number, eg., https://192.168.1.64:81.
Configuring QoS Settings
Purpose:
QoS (Quality of Service) can help solve the network delay and network congestion by configuring
the priority of data sending.
Steps:
1. Enter the QoS settings interface:
Configuration >Advanced Configuration > Network > QoS
Figure 6-16 QoS Settings
2. Configure the QoS settings, including video / audio DSCP, event / alarm DSCP and
Management DSCP.
The valid DSCP value ranges from 0 to 63. The DSCP value is bigger, the priority is higher.
3. Click to save the settings.
 Make sure that you enable the QoS function of your network device (such as a router).
 It will ask for a reboot for the settings to take effect.