User Manual

User Manual of E Series Network Speed Dome
© Hikvision
90
10.2 Configuring Authentication Security
Purpose:
You can specifically secure the stream data of live view.
Steps:
1. Enter the Authentication interface:
Configuration> Advanced Configuration> Security > Authentication
2. Set the authentication mode for each authentication type.
RTSP Authentication: Select the authentication mode as basic or disable in the dropdown list
to enable or disable the RTSP authentication.
3. Click to save the settings.
10.3 Configuring Anonymous Visit
Enabling this function allows visit for whom doesn’t have the user name and password of the
device.
Only live view is available for the anonymous user.
Steps:
1. Enter the Anonymous Visit interface:
Configuration> Advanced Configuration> Security > Anonymous Visit
Figure 10-5 Anonymous Visit
2. Set the Anonymous Visit permission Enable or Disable in the drop-down list to enable or
disable the anonymous visit.
3. Click Save to save the settings.
There will be a checkbox of Anonymous by the next time you logging in.
Figure 10-6 Login Interface with an Anonymous Checkbox
4. Check the checkbox of Anonymous and click Login.
By permitting the Anonymous “Live View” function, you may enable others to access your speed
dome and view live images without providing login credentials. It therefore is critical when