User Manual

User Manual of E Series Network Speed Dome
© Hikvision
78
The pre-record time changes according to the video bitrate.
 Post-record: The time you set to stop recording after the scheduled time or the event.
For example, if an alarm triggered recording ends at 11:00, and the post-record time is
set as 5 seconds, the speed dome records until 11:00:05.
The Post-record time can be configured as 5 s, 10 s, 30 s, 1 min, 2 min, 5 min or 10 min.
 Overwrite: If you enable his function and the HDD is full, the new record files overwrite
the oldest record files automatically.
 Recording Stream: You can select the stream type for recording; Main stream and Sub
Stream are selectable. If you select the sub stream, you can record for a longer time with
the same storage capacity.
The Pre-record and Post-record parameters vary depending on the speed dome
model.
4. Click to edit the record schedule.
Figure 7-8 Record Schedule
5. Choose the day to set the record schedule.
(1) Set all-day record or segment record:
 If you want to configure the all-day recording, please check the All Day checkbox.
 If you want to record in different time sections, check the Customize checkbox. Set the
Start Time and End Time.
The time of each segment can’t be overlapped. Up to 8 segments can be