User Manual

User Manual of E Series Network Speed Dome
© Hikvision
76
Figure 7-2 Add Network Disk
The network disk file path name share is user-defined while creating the DVR
network storage. Please refer to the User Manual of NAS for creating the file path.
(5) Click to add the network disk.
After having saved successfully, you need to reboot the speed dome to activate the
settings.
2. Initialize the added network disk.
(1) Enter the HDD Settings interface (Advanced Configuration > Storage > Storage
Management), in which you can view the capacity, free space, status, type and property
of the disk.
(2) If the status of the disk is Uninitialized as shown in Figure 7-3, check the corresponding
checkbox to select the disk and click to start initializing the disk.
Figure 7-3 Initialize Disk
Figure 7-4 Initializing
When the initialization completed, the status of disk will become Normal as shown in
Figure 7-5.
Figure 7-5 View Disk Status
Quota:
In Storage Management interface, you can predefine the storage space for storing the pictures
and videos by configuring the Percentage of Picture and Percentage of Record manually.
 Up to 8 NAS disks can be connected to the speed dome.
 To initialize and use the SD card after insert it to the speed dome, please refer to the steps
of NAS disk initialization.