User Manual

User Manual of E Series Network Speed Dome
© Hikvision
70
6.6.6 Detecting Audio Exception
Purpose:
When you enable this function and audio exception occurs, the alarm actions will be triggered.
Steps:
1. Enter the video audio exception detection interface:
Configuration > Advanced Configuration > Smart Event > Audio Exception Detection
Figure 6-51 Audio Exception Detection
2. Check the checkbox of Audio Loss Detection to enable the audio input exception detection.
3. Check the checkbox of Sudden Increase of Sound Intensity Detection checkbox to enable
the sudden rise detection.
 Sensitivity: Range [1-100], the smaller the value the more severe the sound change will
trigger the detection.
 Sound Intensity Threshold: Range [1-100], it can filter the sound in the environment, the
louder the environment sound, the higher the value should be. You can adjust it according
to the actual environment.
4. Check the checkbox of Sudden Decrease of Sound Intensity Detection checkbox to enable
the sudden drop detection.
Sensitivity: Range [1-100], the smaller the value the more severe the sound change will
trigger the detection.
5. Click to edit the arming schedule. The arming schedule configuration is the same
as the setting of the arming schedule for motion detection. Refer to Step 2 in Section 6.6.1.
6. Check the checkbox to select the linkage method taken for audio exception. Notify
surveillance center, send email, trigger alarm output, etc. are selectable. Please refer to Step
3 in Section 6.6.1.
7. Click to save the settings.