User Manual

User Manual of E Series Network Speed Dome
© Hikvision
67
6.6.3 Configuring External Alarm Input
Steps:
1. Enter the Alarm Input Settings interface:
Configuration > Advanced Configuration> Basic Event > Alarm Input:
2. Choose the alarm input No. and the Alarm Type. The alarm type can be NO (Normally Open)
and NC (Normally Closed).
3. Edit the name in to set a name for the
alarm input (optional).
Figure 6-47 Alarm Input Settings
4. Click to set the arming schedule for the alarm input. Refer to Step 2 Set the
Arming Schedule for Motion Detection in Section 6.6.1 Configuring Motion Detection.
5. Check the checkbox to select the linkage method taken for the alarm input. Refer to Step 3 Set
the Alarm Actions for Motion Detection in Section 6.6.1 Configuring Motion Detection.
6. You can also choose the PTZ linking for the alarm input. Check the relative checkbox and
select the No. to enable Preset Calling, Patrol Calling or Pattern Calling.
7. You can copy your settings to other alarm inputs.
8. Click to save the settings.