User Manual

User Manual of E Series Network Speed Dome
© Hikvision
43
The protected LAN with 802.1X standard is shown as follows:
Speed Dome
PC
Network Switch
Internet
PC
RADIUS Server
Authenticator
Authentication
Server
Figure 6-16 Protected LAN
 Before connecting the Network Camera to the protected LAN, please apply a digital
certificate from a Certificate Authority.
 The network camera requests access to the protected LAN via the authenticator (a
switch).
 The switch forwards the identity and password to the authentication server (RADIUS
server).
 The switch forwards the certificate of authentication server to the network camera.
 If all the information is validated, the switch allows the network access to the protected
network.
 For your privacy and to better protect your system against security risks, we strongly
recommend the use of strong passwords for all functions and network devices. The password
should be something of your own choosing (using a minimum of 8 characters, including
upper case letters, lower case letters, numbers and special characters) in order to increase
the security of your product.
 Proper configuration of all passwords and other security settings is the responsibility of the
installer and/or end-user.
Steps:
1. Connect the network camera to your PC directly with a network cable.
2. Enter the 802.1X Settings interface:
Configuration > Advanced Configuration > Network > 802.1X