User Manual

User Manual of E Series Network Speed Dome
© Hikvision
40
upper case letters, lower case letters, numbers and special characters) in order to increase
the security of your product.
 Proper configuration of all passwords and other security settings is the responsibility of the
installer and/or end-user.
Steps:
1. Enter the DDNS Settings interface:
Configuration > Advanced Configuration > Network > DDNS
Figure 6-11 DDNS Settings
2. Check the Enable DDNS checkbox to enable this feature.
3. Select DDNS Type. Three DDNS types are selectable: IPServer, HiDDNS, NO-IP and DynDNS.
 DynDNS:
Steps:
(1) Enter Server Address of DynDNS (e.g. members.dyndns.org).
(2) In the Domain text field, enter the domain name obtained from the DynDNS website.
(3) Enter the Port of DynDNS server.
(4) Enter the User Name and Password registered on the DynDNS website.
(5) Click to save the settings.
Figure 6-12 DynDNS Settings
 IP Server:
Steps:
(1) Enter the Server Address of the IP Server.
(2) Click to save the settings.
The Server Address should be entered with the static IP address of the computer that
runs the IP Server software. For the IP Server, you have to apply a static IP, subnet mask,
gateway and preferred DNS from the ISP.