User Manual

User Manual of E Series Network Speed Dome
© Hikvision
23
3. Click to enter the adding interface of preset as shown in Figure 4-7.
Figure 4-7 Adding Presets
4. Configure the preset number, patrol time and patrol speed.
Name
Description
Patrol Time
It is the duration staying on one patrol point. The speed dome
moves to another patrol point after the patrol time.
Patrol Speed
It is the speed of moving from one preset to another.
5. Click to save a preset into the patrol.
6. Repeat the steps from 3 to 5 to add more presets.
7. Click to save all the patrol settings.
 Calling a Patrol:
In the PTZ control panel, select a defined patrol from and click to call the
patrol as shown in Figure 4-8.
Figure 4-8 Calling a Preset
 Buttons on the Patrols interface:
Buttons
Description
Save a patrol