User Manual

User Manual of E Series Network Speed Dome
© Hikvision
22
speed dome starts auto scan function.
Table 4-3 Special Presets
Preset No.
Function
Preset No.
Function
33
Auto flip
93
Set limit stops manually
34
Back to initial position
94
Remote reboot
35
Call patrol 1
96
Stop a scan
36
Call patrol 2
97
Start random scan
37
Call patrol 3
98
Start frame scan
38
Call patrol 4
99
Start auto scan
39
IR cut filter in
100
Start tilt scan
40
IR cut filter out
101
Start panorama scan
41
Call pattern 1
102
Call patrol 5
42
Call pattern 2
103
Call patrol 6
43
Call pattern 3
104
Call patrol 7
44
Call pattern 4
105
Call patrol 8
45
One-touch patrol
106
Fan On
92
Start to set limit stops
107
Fan Off
108
Fan On By Temperature
Control
Figure 4-6 Special Preset
When you calling preset 45 (one-touch patrol), the speed dome patrols from the
preset 1 to 32. Before you enable this function, please set the preset 1 to 32 first.
4.4.3 Setting / Calling a Patrol
Purpose:
A patrol is a memorized series of preset function. It can be configured and called on the patrol
settings interface. There are up to 8 patrols for customizing. A patrol can be configured with 32
presets.
Before you start:
Please make sure that the presets you want to add into a patrol have been defined.
 Setting a Patrol:
Steps:
1. In the PTZ control panel, click to enter the patrol settings interface.
2. Select a patrol number from .