User Manual

User Manual of E Series Network Speed Dome
© Hikvision
19
Steps:
1. Click the on the toolbar to enter the regional focus operation mode.
2. Click-and-drag the mouse to draw a rectangle on the image as the desired focus region.
3. Click the to exit the regional focus operation mode.
Regional Exposure:
Steps:
1. Click the on the toolbar to enter the regional exposure operation mode.
2. Click-and-drag the mouse to draw a rectangle on the image as the desired exposure region.
3. Click the to exit the regional exposure operation mode.
3D Positioning:
Steps:
1. Click on the tool bar of live view interface.
2. Operate the 3D positioning function:
 Left click a position of the live video. The corresponding position will be moved to the
center of the live video.
 Hold down the left mouse button and drag the mouse to the lower right on the live
video. The corresponding position will be moved to the center of the live video and
zoomed in.
 Hold down the left mouse button and drag the mouse to the upper left on the live
video. The corresponding position will be moved to the center of the live video and
zoomed out.
Please refer to the following sections for more information:
 Configuring remote recording in Section 7.2 Configuring Recording Schedule.
 Setting the image quality of the live video in Section 6.1 Configuring Local Parameters and
Section 6.4.1 Configuring Video Settings.
 Setting the OSD text on live video in Section 6.5.2 Configuring OSD Settings.
4.3 Recording and Capturing Pictures Manually
In the live view interface, click on the toolbar to capture the live pictures or click to
record the live video. The local saving paths of the captured pictures and clips can be set in the
Configuration > Local Configuration interface.
To configure remote automatic recording, please refer to Section 7.2 Configuring Recording
Schedule.