User Manual

User Manual of E Series Network Speed Dome
© Hikvision
93
Clicking restores all the parameters to default settings including the IP
address and user information. Please use this button with caution.
Figure 10-10 Restore Default Settings
10.7.3 Importing/Exporting Configuration File
Steps:
1. Enter the Maintenance interface:
Configuration > Basic Configuration> System > Maintenance
Or Configuration > Advanced Configuration> System > Maintenance
2. Click to select the local configuration file and then click to start
importing configuration file.
You need to reboot the speed dome after importing configuration file.
3. Click and set the saving path to save the configuration file in local storage.
Figure 10-11 Import/Export Configuration File
10.7.4 Upgrading the System
Steps:
1. Enter the Maintenance interface:
Configuration > Basic Configuration> System > Maintenance
Or Configuration > Advanced Configuration> System > Maintenance
2. Select Firmware or Firmware Directory.
 Firmware: when you select Firmware, you need to find the firmware in your computer
to upgrade the device.
 Firmware Directory: You need to find the directory where the firmware locates. The