User's Manual

User Manual of Network PTZ Camera

For some certain camera models, disable the third stream first and then the true WDR function is

valid.

 Click to select between and play the live video via player Webcomponents

or Quick Time. The live video is played via webcomponents by default, and other types of

players are supported for the browser, such as MJPEG, and VLC. You are required to download

and install the player to play the live video.

 Click and it displays . Click to enable two-way audio and the icon turns

into . Click the icon again to stop two-way audio.

 Click to start live view and the icon turns into . Click the icon again to stop live view.

 Click to capture the picture.

 Click to start recording and the icon turns into . Click the icon again to stop

recording.

 Click to enable digital zoom function and the icon turns into . Then drag the mouse

towards low right direction to draw a rectangle on the image as the desired zoom. After

viewing it you can click any place of the picture to get back to normal picture.

 Click the on the toolbar to enter the regional exposure operation mode and the icon

turns into . Then drag the mouse to draw a rectangle on the image as the desired

exposure region.

 Click the on the toolbar to enter the regional focus operation mode and the icon turns

into . Then drag the mouse to draw a rectangle on the image as the desired focus region.

 Click to display the . Drag the slider to adjust the volume.

Before using the two-way audio or recording with audio functions, set the Stream Type to Video

& Audio referring to Section 6.2.1 Configuring Video Settings.

Refer to the following sections for more information:

 Configuring remote recording in Section 5.1.1 Configuring Recording Schedule.

 Setting the image quality of the live video in Section 6.3 Configuring Image Settings and

Section 6.2.1 Configuring Video Settings.

 Setting the OSD text on live video in Section 6.3.2 Configuring OSD Settings.

4.4 Operating PTZ Control

Purpose:

In the live view interface, you can use the PTZ control buttons to control panning, tilting and

zooming.