User Manual

ManualsBrandsHikvision ManualsSecurity Cameras2MP Outdoor PTZ Network Dome Camera with Night Vision

Table Of Contents

Chapter 1 Overview
- 1.1 System Requirement
- 1.2 Functions
Chapter 2 Network Connection
- 2.1 Setting the Network Mini PTZ camera over the LAN
  - 2.1.1 Wiring over the LAN
  - 2.1.2 Activating the Mini PTZ camera
- 2.2 Setting the Network Mini PTZ camera over the WAN
  - 2.2.1 Static IP Connection
  - 2.2.2 Dynamic IP Connection
Chapter 3 Access to the Network Mini PTZ camera
- 3.1 Accessing by Web Browsers
- 3.2 Accessing by Client Software
Chapter 4 Basic Operations
Chapter 5 System Configuration
Chapter 6 Mini PTZ Camera Configuration
Appendix
- SADP Software Introduction

User Manual of E Series Network Mini PTZ camera

© Hikvision

73

Figure 6-10 SNMP Settings

2. Check the corresponding version checkbox (Enable SNMP v1, Enable SNMP v2c,

Enable SNMP v3) to enable the feature.

3. Configure the SNMP settings.

The configuration of the SNMP software should be the same as the settings you

configure here.

4. Click to save and finish the settings.

Configuring FTP Settings

Purpose: