User Manual

ManualsBrandsHikvision ManualsSecurity Cameras2MP Outdoor PTZ Network Dome Camera with Night Vision

Table Of Contents

Chapter 1 Overview
- 1.1 System Requirement
- 1.2 Functions
Chapter 2 Network Connection
- 2.1 Setting the Network Mini PTZ camera over the LAN
  - 2.1.1 Wiring over the LAN
  - 2.1.2 Activating the Mini PTZ camera
- 2.2 Setting the Network Mini PTZ camera over the WAN
  - 2.2.1 Static IP Connection
  - 2.2.2 Dynamic IP Connection
Chapter 3 Access to the Network Mini PTZ camera
- 3.1 Accessing by Web Browsers
- 3.2 Accessing by Client Software
Chapter 4 Basic Operations
Chapter 5 System Configuration
Chapter 6 Mini PTZ Camera Configuration
Appendix
- SADP Software Introduction

User Manual of E Series Network Mini PTZ camera

© Hikvision

43

Figure 5-11 Motion Detection Settings-Normal

Steps:

(1) . Click and drag the mouse on the live video image to draw a motion

detection area.

(2) Click to finish drawing.

• You can draw up to 8 motion detection areas on the same image.

• You can click to clear all of the areas.

(3) Move the slider to set the

sensitivity of the detection.

 Expert