User Manual
Table Of Contents
- Chapter 1 Overview
- Chapter 2 Network Connection
- Chapter 3 Accessing to the Network Speed Dome
- Chapter 4 Basic Operations
- Chapter 5 System Configuration
- 5.1 Storage Settings
- 5.2 Basic Event Configuration
- 5.3 Smart Event Configuration
- 5.4 PTZ Configuration
- 5.4.1 Configuring Basic PTZ Parameters
- 5.4.2 Configuring PTZ Limits
- 5.4.3 Configuring Initial Position
- 5.4.4 Configuring Park Actions
- 5.4.5 Configuring Privacy Mask
- 5.4.6 Configuring Scheduled Tasks
- 5.4.7 Clearing PTZ Configurations
- 5.4.8 Configuring Smart Tracking
- 5.4.9 Prioritize PTZ
- 5.4.10 Position Settings
- 5.4.11 Rapid Focus
- Chapter 6 Camera Configuration
- Appendix
© Hikvision
the network.
Figure 4-3 Start Live View
Table 4-1 Descriptions of the Toolbar and Live View Parameters
Icon
Description
Click the button to enable Pixel Counter. Draw an area in live view
window, and it shows the height and width of the selected area.
/
Start/stop Live view.
Manually capture the pictures.
/
Manually start/stop recording.
/
Steps:
1. Click the button to enable Digital Zoom function.
2. Draw a rectangle on the image as the target area, and the area will
be zoomed in.
3. After viewing, you can click any place of the picture to get back to
normal picture.
/
Steps:
1. Click the button to enter the regional exposure operation mode.
2. Draw a rectangle on the image as target exposure region.
/
Steps:
1. Click the button to enter the regional focus operation mode.
2. Draw a rectangle on the image as the target focus region.
/
Mute/audio on and adjust volume
Note:
The function is only supported by certain camera models.