User's Manual

Note
Install cercates according to the requirement of the log server. If two-way authencaon is
r
equired, install the CA cercate and the client cercate. If one-way authencaon is required,
install the CA cercate.
1. Oponal: Ins
tall client cercate.
1) Click Create to create the cercate request. Fill in the required informaon in the pop-up
window.
2) Click Download to download the cercate request and submit it to the trusted authority for
signature.
3) Install the authorized cercate to the device.
6. Install the CA cercate to the device.
Note
Prepare a CA cercate in advance.
1) Click Br
owse, and select the CA cercate le.
2) Click Install.
11.12.5 Set QoS
QoS (Quality of Service) can help improve the network delay and network congeson by seng
the priority of data sending.
Note
QoS needs support from network device such as router and switch.
Steps
1. Go t
o Conguraon → Network → Advanced Conguraon → QoS .
2. Set Video/Audio DSCP, Alarm DSCP and Management DSCP.
Note
Network can idenfy the priority of data transmission. The bigger the DSCP value is, the higher
the priority is. Y
ou need to set the same value in router while conguraon.
3. Click Sa
ve.
11.12.6 Set IEEE 802.1X
IEEE 802.1x is a port-based network access control. It enhances the security level of the LAN/
WLAN. When de
vices connect to the network with IEEE 802.1x standard, the authencaon is
needed.
Go t
o Conguraon → Ne
twork → Advanced Sengs → 802.1X , and enable the funcon.
Network Speed Dome User Manual
86