User's Manual

2. Choose from the following methods to start one-touch park.
-
Click .
-
Call Pr
eset No. 32.
4.9 Set Privacy Mask
Privacy mask enables you to cover certain areas on the live image to prevent certain spots in the
surveillance area from being live viewed and recorded.
Steps
1. Go to Conguraon → P
TZ → Privacy Mask .
2. Check Enable Privacy Masks.
3. Adjust the live image to the target scene via PTZ control buons.
4. Draw the area.
Draw Area Click Draw Area, and click on the live view
image to determine the boundary of the
mask.
Stop Drawing ClickStop Drawing aer drawing the mask.
5. Click Add.
It is listed in Privacy Mask List.
6. Edit Name, Type, and
Acve Zoom Rao on your demand.
Acve Zoom Rao
When the actual zoom rao is less than the set acve zoom rao, the set area can not be
covered. When the actual zoom rao is greater than the set acve zoom rao, the privacy
mask is valid. The maximum value of acve zoom rao depends on the camera module.
7. R
epeat the steps above to set other privacy masks.
8. ClickSave.
4.10 Set Smart Tracking
The funcon allows the device detecng and tracking the moving targets in the scene. The target
s
tays in the center of the live image with a predened size during the tracking process.
Steps
1. Go to Conguraon → PTZ → Smart Tracking .
2. Check Enable Smart Tracking
3. Set the Duraon. The device stops tracking when the duraon
me is up.
4. Select a target in the live image and adjust the PTZ buons to see the target at desired size.
5. Click Set Zoom Rao. The device tracks the target at a xed zoom rao.
6. Click Save.
Network Speed Dome User Manual
19