User's Manual

3.4 Face Capture Algorithm Parameters
It is used to set and opmize the parameters of the algorithm library for face capture.
Face Capture Version
It refers to the current algorithm version, which cannot be edited.
Detecon Parameters
Generaon Speed
The speed to idenfy a target can be set by adjusng the slider, ranging from 1 to 5. The higher
the value is, the faster the target will be recognized. The default value is recommended.
Sensivity
The sensivity to idenfy a target can be set by adjusng the slider, ranging from 1 to 5. The
higher the value is, the easier a face will be detected, and the higher possibility of
misinformaon would be. The default value of 3 is recommended.
Capture Parameters
Upload Feature
Feature stands for the feature informaon the algorithm can tell from face pictures. For
e
xample, gender, facial expression, wearing glasses or not, etc. Check the funcon to upload the
informaon.
Best Shot
The device captures the target picture with the highest score aer
seng the parameters.
Capture Times
It refers to the capture mes a face will be captured during its stay in the detecon area.
Capture Threshold
It refers for the quality of face to trigger capture and alarm. Higher value means beer quality
should be me
t to trigger capture and alarm.
Quick Shot
The device captures the target picture once the score of the captured face exceeds the Quick
Shot Threshold during the Max. Capture Interval. Otherwise, the device selects and uploads
the picture with the highest score during the Max. Capture Interval.
Quick Shot Threshold
It refers to the quality of face to trigger quick shot.
Max. Capture Interval
It describes the max. me occupaon for one quick shot.
Cap
ture Times
Network Speed Dome User Manual
10