User Manual

UM DS-2CE57H0T-VPITF Dome 052220NA 8
Figure 3, Dome Cover Removal
Do not remove the screws completely.
Exercise caution when removing the dome
cover. The dome cover is connected to the
mounting base using a safety cord.
4. Route the cables through the cable hole or the side
opening.
5. Attach the mounting base to the ceiling with the
supplied screws.
Figure 4, Mounting Base Attachment
6. Connect the corresponding cables, such as the
power cord and the video cable.
7. Power the camera on and verify whether the output
image is set at the right angle. If it is not, loosen
the tilt adjustment screw and adjust the angle.