User Manual

UM DS-2CE57H0T-VPITF Dome 052220NA 7
3 Installation
Before You Start
Make sure that the device in the package is in good
condition and that all assembly parts are included.
Make sure that all the related equipment is powered
off during the installation.
Check the product specification for the installation
environment.
Check whether the power supply matches your power
output to avoid damage.
Make sure the wall is strong enough to withstand
three times the weight of the camera and the mount.
If the wall is concrete, insert expansion bolts before
installing the camera. If the wall is wood, use self-
tapping screws to secure the camera.
If the product does not function properly, contact your
dealer or the nearest service center. Do NOT
disassemble the camera for repair or maintenance
yourself.
3.1 Camera Installation
Before You Start
Ceiling mounting and wall mounting are similar. The
following takes ceiling mounting as an example.
1. Paste the supplied drill template to the location on
the ceiling where the camera is to be installed.
2. Drill the screw holes and the cable hole (optional)
according to the drill template.
Figure 2, Drill Template Installation
Drilling a cable hole is required when
mounting the camera on the ceiling.
3. Loosen the screws on the dome cover and remove
it.