User Manual

7. Connect the corresponding cables, such as power
cord, and video cable.
8. Repeat steps 8 to 9 of the 2.1 Ceiling Mounting to
complete the installation.
2.4 Mounting with Inclined Base of Type I Camera
Before you start:
You need to purchase an inclined base separately.
Steps:
1. Drill 4 screw holes and the cable hole in the ceiling
according to the holes of the inclined base.
2. Install the inclined base to the ceiling with supplied
screws, as shown in Figure 2-9.
Figure 2-9 Fix the Inclined Base
3. Route the cables through the cable hole, or the side
opening of the inclined base.
4. Fix the camera to the inclined base with the
supplied screws.
Figure 2-10 Fix the Camera to the Base
5. Repeat the steps 7 to 9 of the 2.1 Ceiling Mounting
section to complete the installation.