User Manual

UM DS-2CE5xH0T-Axxxxx 042318NA 8
Type I Camera Type II Camera
Figure 8 Install Wall Mounting Mount
4. Refer to step 3 of 2.1 Ceiling Mounting of Type I
and Type II Camera to remove dome camera’s
bubble and the black liner.
5. Attach the dome camera back box/base plate to
the wall mount and secure with supplied screws.
Type I Camera Type II Camera
Figure 9 Attach the Base Plate to the Mount
6. Route the cables through the mount.
7. Repeat steps 6 to 9 of the 2.1 Ceiling Mounting of
Type I and Type II Camera to complete the
installation.
3.3 Type III Camera Ceiling Mounting
Before you start:
Both wall mounting and ceiling mounting are suitable
for the dome camera. Ceiling mounting will be taken
as an example in this section. Use the ceiling
mounting steps as a reference for wall mounting.
Steps:
1. Paste the drill template to the celling.
2. Drill screw holes and the cable hole (optional) on
the ceiling according to the supplied drill
template.
Figure 10 The Drill Template
Note:
Drill the cable hole (hole A) when using the ceiling
outlet to route the cable.
3. Loosen the bubble screws and remove the