User Manual

UM DS-2CE5xH0T-Axxxxx 042318NA 4
• Do not place the camera in extremely hot, cold
(the operating temperature shall be -40° to 60° C),
dusty or damp locations, and do not expose it to
high electromagnetic radiation.
• If cleaning is necessary, use a clean cloth with a bit
of ethanol, and wipe it gently.
• Do not aim the camera at the sun or extra bright
places.
• The sensor may be burned out by a laser beam, so
when any laser equipment is in using, make sure
that the sensor surface will not be exposed to the
laser beam.
• Do not expose the device to high electromagnetic
radiation or extremely hot, cold, dusty, or damp
environments.
• To avoid heat accumulation, good ventilation is
required for the operating environment.
• Keep the camera away from liquid while in use for
non-waterproof devices.
• While in delivery, the camera shall be packed in its
original packing, or packing of the same material. 
1.1.8 Mark Description
Table 0-1 Mark Description
Mark
Description
DC Voltage
AC Voltage
2 Introduction
2.1 Product Features
The main features are as follows:
• High performance CMOS sensor
• IR cut filter with auto switch
• OSD menu with configurable parameters
• Auto white balance
• Internal synchronization
• SMART IR mode
• 3-axis adjustment 
2.2 Overview
2.2.1 Overview of Type I Camera
Figure 1 Overview of Type I Camera