User Manual

UM DS-2CE5xH0T-Axxxxx 042318NA 16
4.5.2 BRIGHTNESS
Brightness refers to the brightness of the image.
You can set the brightness value from 1 to 9 to
darken or brighten the image. The higher the value,
the brighter the image.
4.5.3 CONTRAST
This feature enhances the difference in color and light
between parts of an image. You can set the
CONTRAST value from 1 to 9.
4.5.4 SHARPNESS
Sharpness determines the amount of detail an
imaging system can reproduce. You can set the
SHARPNESS value from 1 to 9.
4.5.5 SATURATION
Adjust this feature to change the saturation of the
color. The value ranges from 1 to 9.
4.5.6 DNR (Digital Noise Reduction)
The DNR function can decrease the noise effect,
especially when capturing moving images in poor
light conditions and delivering more accurate and
sharp image. You can set the DNR value from 1 to 9.
4.5.7 MIRROR
OFF, H, V, and HV are selectable for mirror.
OFF: The mirror function is disabled. H: The image
flips 180° horizontally. V: The image flips 180°
vertically.
HV: The image flips 180° both horizontally and
vertically.
4.6 FACTORY DEFAULT
Move the cursor to FACTORY DEFAULT and click Iris+
to reset all the settings to the factory default.
4.7 EXIT
Move the cursor to EXIT and click Iris+ to exit the
menu without saving.
4.8 SAVE & EXIT
Move the cursor to SAVE & EXIT and click Iris+ to
save the settings, and exit the menu.