User Manual

UM DS-2CE5xH0T-Axxxxx 042318NA 10
Figure 14 Fit the Black Liner Back
9. Tighten the screws on the dome camera bubble
to finish the installation.
Figure 15 Finish Installation
3.4 Type III Camera Wall Mounting
Before you start:
You must purchase a wall mount.
Steps:
1. Drill four screw holes in the wall according to the
holes of the mount.
2. Attach the mount to the wall by aligning the four
screw holes of the mount with expansion screws
on the wall.
3. Secure the mount with four hex nuts and
washers.
Figure 16 Install Wall Mount
4. Refer to step 3 of 2.3 Ceiling Mounting of Type III
Camera to remove dome camera’s bubble.
5. Attach the back box of the dome camera to the
wall mount, and secure them with supplied
screws.