User Manual

1 Introduction
1.1 Product Features
The camera is applicable for both indoor and outdoor
conditions, and the application scenarios include road,
warehouse, underground parking lot, bar, etc.
The main features are as follows:
 High performance CMOS sensor
 Low illumination, 0.005 Lux @ (F 1.8, AGC ON), 0 Lux
with IR
 IR cut filter with auto switch
 OSD menu with configurable parameters
 Auto white balance
 internal synchronization
 SMART IR mode
 PoC (with-E)
 3-axis adjustment
Note:
Type II camera is applicable to indoor conditions only.
1.2 Overview
Before you start:
The cables of device vary according to different models.
The cables of each type are shown in the figures below,
refer to the actual sample.
You can debug the camera by connecting an auxiliary
HD TVI cable to the auxiliary video output.
1.2.1 Overview of Type I Camera
Bubble
Auxiliary
Video Output
Lens
Back Box
Menu Button
Video Cable
Power Cord
24 VAC/12 VDC
Cables
Video Cable
Power Cord
12 VDC
Model I Cables
Model II Cables
Figure 1-1 Overview of Type I Camera
1.2.2 Overview of Type II Camera
Bubble
Auxiliary
Video Output
Lens
Back Box
Menu Button
Video Cable
Power Cord
24 VAC/12 VDC
Cables
Video Cable
Power Cord 12 VDC
Model I Cables
Model II Cables
Base Plate
Figure 1-2 Overview of Type II Camera