User Manual

4. Fix the camera on the junction box’s cover with
three supplied screws.
Junction Box
Cover
Figure 2-11 Fix the Camera on the Junction Box’s Cover
5. Secure the junction box’s body with supplied screws
on the ceiling/wall.
Figure 2-12 Install the Junction Box
6. Route the cables through the bottom cable hole, or
the side cable hole of the junction box.
7. Combine the junction box cover with its body with
supplied screws on the junction box’s cover.
Figure 2-13 Combine the Junction Box’s
Cover with its Body
8. Repeat the step 5 and 6 of 2.2.1 Ceiling/Wall
Mounting without Junction Box to complete the
installation.