User Manual

UM DS-2CEx6H0T-xxITxF 042618NA 8
Figure 8 Fix the Camera on the Junction Box Cover
5. Align the junction box body to the ceiling/wall by
using the junction box screw holes.
6. Secure the junction box body to the ceiling/wall
with supplied screws.
Figure 9 Fix the Junction Box to the Wall/Ceiling
7. Route the cables through the bottom cable hole
or the side cable hole of the junction box.
8. Combine the junction box cover with its body.
Figure 10 Fix Junction Box Cover to its Body
9. Repeat step 5 and 6 of 2.1.1 Ceiling/Wall
Mounting without Junction Box to complete the
installation.
3.2 Installation of Type II Camera
3.2.1 Ceiling/Wall Mounting without Junction Box
Steps:
1. Paste the drill template (supplied) where you
want to install the camera.