User Manual

UM DS-2CEx6H0T-xxITxF 042618NA 6
• Make sure the wall is strong enough to withstand
three times the weight of the camera and the
mount.
• If the wall is cement, insert expansion bolts before
installing the camera. If the wall is wooden, use
self-tapping screws to secure the camera.
• If the product does not function properly, contact
your dealer or the nearest service center. Do NOT
disassemble the camera for repair or maintenance
by yourself. 
3.1 Installation of Type I Camera
3.1.1 Ceiling/Wall Mounting without Junction Box
Steps:
1. Paste the drill template (supplied) where you
want to install the camera.
2. Drill the screw holes and the cable hole (optional)
in the ceiling/wall according to the drill template.
Figure 4 Drill Template
Note:
Drill the cable hole when using the ceiling outlet to
route the cable.
3. Attach the bracket to the ceiling/wall and secure
the camera with supplied screws.
Figure 5 Fix the Camera to the Ceiling
Note:
• The supplied screw package contains self-tapping
screws and expansion bolts. 
• For a cement wall/ceiling, expansion bolts are
required to fix the camera. For a wooden
wall/ceiling, self-tapping screws are required. 
4. Route the cables through the cable hole or the
side opening.