User Manual

UM D-2CE11H0T-PIRL  2018 Hikvision USA Inc.
Figure 7, Fix the Junction Box to the Wall/Ceiling
7. Route the cables through the bottom cable hole or the side cable
hole of the junction box.
8. Combine the junction box cover with its body.
Figure 8, Fix the Junction Box Cover back to its Body
9. Repeat step 5 and 6 of 2.1.1 Ceiling/Wall Mounting without
Junction Box to complete the installation.
4 Menu Description
Purpose:
Call the menu by clicking the button on the PTZ Control interface, or call
the preset no.95.
Steps:
1. Connect the camera to the TVI DVR and the monitor, as shown below.
Figure 9, Connection
2. Power on the analog camera, TVI DVR, and the monitor to view the image
on the monitor.
3. Click PTZ Control to enter the PTZ Control interface.
4. Call the camera menu by clicking the button or call the preset no. 95.