User Manual

UM D-2CE11H0T-PIRL  2018 Hikvision USA Inc.
2). Loosen the T screw to adjust the tilt position [0° to 180°].
Tighten the screw after completing the adjustment.
3). Loosen the R screw and rotate the camera [0° to 360°].
Tighten the screw after completing the adjustment.
3.1.2 Ceiling/Wall Mounting with Junction Box
Before you start:
You need to purchase a junction box separately.
Steps:
1. Paste the drill template on the ceiling/wall.
2. Drill screw holes and the cable hole in the ceiling/wall according
to the holes of the drill template.
Figure 5, Drill Template of Junction Box
3. Take apart the junction box and align the screw holes of the bullet
camera with those on the junction box cover.
4. Fix the camera on the junction box’s cover with supplied screws.
Figure 6, Fix the Camera on the Junction Box Cover
5. Attach the junction box body to the ceiling/wall by aligning the
screw holes of the junction box.
6. Secure the junction box’s body with supplied screws on the
ceiling/wall.