User Manual

UM D-2CE11H0T-PIRL  2018 Hikvision USA Inc.
2. Drill the screw holes and the cable hole (optional) in the
ceiling/wall according to the drill template.
Figure 2, Drill Template
Note:
Drill a cable hole when using the ceiling outlet to route the cable.
Figure 3, Fix the Camera to the Ceiling
3. Attach the bracket to the ceiling/wall, and secure the camera with
supplied screws.
Note:
• The supplied screw package contains self-tapping screws and
expansion bolts. 
• For cement wall/ceiling, expansion bolts are required to fix the
camera. For wood wall/ceiling, self-tapping screws are required. 
4. Route the cables through the cable hole or the side opening.
5. Connect the corresponding power cord and video cable.
6. Power on the camera to check whether the image on the monitor
is at an optimum angle. If not, adjust the camera according to the
figure below to get an optimum angle.
Figure 4, 3-axis Adjustment
1). Loosen the P screw to adjust the pan position [0° to 360°].
Tighten the screw after completing the adjustment.