User Manual

ManualsBrandsHikvision ManualsBullet Cameras5 Megapixel Outdoor IR Bullet Camera, 2.8mm Lens

UM D-2CE11H0T-PIRL  2018 Hikvision USA Inc.

Warnings

Cautions

Follow these

these safeguards to

precautions to prevent

prevent serious injury

potential injury or

or death.

material damage.

1.7 Warnings

• In the use of the device, you must be in strict compliance with the electrical

safety regulations of the nation and region.



• Input voltage should meet both the SELV (Safety Extra Low Voltage) and the

Limited Power Source with 12 VDC according to the IEC60950-1 standard. Refer

to technical specifications for detailed information.

• Do not connect multiple devices to one power adapter to avoid overheating or

a fire hazard caused by overload.

• Make sure that the plug is firmly connected to the power socket.

• Make sure that the device is firmly fixed if wall mounting or ceiling mounting is

adopted.

• If smoke, odor, or noise rise from the device, turn off the power at once and

unplug the power cord, and then contact the service center.

• Never attempt to disassemble the camera by unprofessional personal.



1.8 Cautions

• Do not drop the camera or subject it to physical shock.

• Do not touch sensor modules with fingers.

• Do not place the camera in extremely hot, cold (the operating temperature shall

be -40° to 60° C), dusty, or damp locations, and do not expose it to high

electromagnetic radiation.

• If cleaning is necessary, use a clean cloth with a bit of ethanol and wipe it

gently.

• Do not aim the camera at the sun or extra bright places.

• The sensor may be burned out by a laser beam, so when any laser equipment is

in use, make sure that the surface of the sensor will not be exposed to the laser

beam.

• Do not expose the device to high electromagnetic radiation or extremely hot,

cold, dusty, or damp environment.

• To avoid heat accumulation, good ventilation is required for the operating

environment.



• Keep the camera away from liquid while in use for non-waterproof device.



• While in delivery, the camera shall be packed in its original packing or packing of

the same texture.



1.9 Mark Description

Table 0-1 Mark Description

Mark Description

DC Voltage