User Manual

UM D-2CE11H0T-PIRL  2018 Hikvision USA Inc.

• LIGHTING

Select the LIGHTING mode, the embedded white light source turns on in

poor light conditions automatically. You can set the LIGHTING MODE to

SOLID or FLASHING.

˗ SOLID

The white light source turns on in poor lighting conditions.

Figure 15, SOLID

˗ FLASHING

When you set the LIGHTING MODE to FLASHING, you can set the

TRIGGER MODE to CAMERA or DVR.

The white light source flashes in poor lighting conditions when

receiving the alarm signal.

TRIGGER MODE

DVR







Set the TRIGGER MODE to DVR. In this way, the alarm signal is

sent from the DVR, and the camera works as an alarm detector

in the process. Besides, the alarm type only supported by the

DVR can also trigger the visible alarm in the camera.

Figure 16, FLASHING

o CAMERA

Set the TRIGGER MODE to CAMERA, the embedded PIR module

sends the alarm signal to the visible alarm in the camera when

the PIR module detects the alarm source.

˗ OFF

Select OFF to disable this function.

• PIR LEVEL

Adjust the sensitivity of the PIR module. The higher the value, the more

sensitive the PIR module.

• FACTORY DEFAULT

Reset all the settings to the factory defaults.