Operation Manual

User Manual of Network Camera

(2) If the status of the disk is Uninitialized, check the corresponding checkbox to

select the disk and click to start initializing the disk.

Figure 7-3 Initializing

When the initialization completed, the status of disk will become Normal.

Figure 7-4 View Disk Status

Notes:

 Up to 8 NAS disks can be connected to the camera.

 To initialize and use the SD card after insert it to the camera, please refer to the

steps of NAS disk initialization.

7.2 Configuring Recording Schedule

Purpose:

There are two kinds of recording for the cameras: manual recording and scheduled

recording. For the manual recording, refer to Section 4.3 Recording and Capturing

Pictures Manually. In this section, you can follow the instructions to configure the

scheduled recording. By default, the record files of scheduled recording are stored in

the SD card (if supported) or in the network disk.

Steps:

1. Enter the Record Schedule Settings interface:

Configuration > Advanced Configuration> Storage > Record Schedule